New Waterproof Windshield Repair Resin from Ultra Bond.

Never get rained-out of doing windshield repairs again with the new” Rain Resin” from Ultra Bond. This new chemical formulation is NOT contaminated by water or moisture.

Ultra Bond’s Rain Resin will not lose clarity or adhesion when there is water or moisture in the stone-break.

Instructions: Start with an empty injector. Use four to five drops of resin. Vacuum first for fifteen seconds. Most of the water will pass through the resin and into the top of the cylinder. Then place in pressure mode and fill the break. Cure under pressure. Any moisture remaining in the break will be absorbed by the resin monomers.

Important: After each repair discard any resin left in the injector which will have most of the water from the break.

To purchase click here or call 800 398-2663.